Services / Electrical Infrared (IR) Imaging · North Vancouver
Electrical Infrared (IR) Imaging
Scope of work
Six Things We Get Called For.
Electrical problems often generate excess heat before equipment fails. Infrared imaging allows us to inspect electrical systems while they are operating and identify areas that may require further investigation.
Electrical Panel Scanning
Thermal imaging of electrical panels to identify abnormal temperatures around breakers, connections and other components.
Loose Connection Detection
Locate heat patterns that may indicate loose, deteriorating or high-resistance electrical connections before they lead to equipment damage.
Overloaded Circuit Identification
Identify circuits and components operating at elevated temperatures that may be associated with excessive electrical loads.
Preventative Maintenance Inspections
Add infrared imaging to your preventative maintenance program to help identify developing electrical issues before they cause unexpected downtime.
Electrical Equipment Inspections
Inspect switchgear, disconnects, transformers, distribution equipment and other electrical components for unusual thermal patterns.
Troubleshooting & Diagnostics
Use thermal imaging as a diagnostic tool when investigating electrical performance issues, recurring faults or unexplained equipment problems.
What’s Included
More Than a Thermal Image.
Infrared imaging is most useful when the results are properly interpreted. We combine thermal scanning with electrical knowledge to help determine what the temperature patterns may indicate and what should happen next.
Thermal Imaging
Electrical equipment scanned using infrared imaging technology.
Problem Identification
Potential hot spots and abnormal temperature patterns identified for further investigation.
Clear Findings
Straightforward information about what was observed during the inspection.
Recommended Next Steps
We explain what should be investigated, repaired or monitored.
What we do
Four Stages, In Order.
We inspect the electrical system under operating conditions, review the thermal patterns and identify areas that may require attention.
Stage 01
Site & System Review
We review the electrical equipment being inspected and discuss any known issues, maintenance concerns or problem areas before beginning the scan.
Stage 02
Infrared Inspection
Electrical panels and equipment are scanned using infrared imaging while operating under load where appropriate. We look for unusual temperature differences and concentrated hot spots.
Stage 03
Findings & Investigation
Any abnormal thermal patterns are reviewed to determine potential causes. Where appropriate, additional electrical testing or physical inspection may be recommended to confirm the issue.
Stage 04
Recommendations
We explain the findings and provide clear recommendations for any equipment that should be repaired, serviced, monitored or investigated further.
Common questions
Asked Before Most Inspections.
Infrared imaging can reveal developing electrical issues that may otherwise remain unnoticed until they cause equipment failure, downtime or other problems.
What can an electrical infrared inspection detect?
Infrared imaging can identify abnormal heat patterns that may be associated with loose connections, overloaded components, deteriorating equipment, unbalanced loads and other electrical issues.
Do you need to shut down the power for an IR inspection?
Typically, electrical equipment is inspected while energized and operating because thermal differences are most useful when the system is under load. Safe access and operating conditions are assessed before the inspection.
Can infrared imaging see through electrical panels or walls?
No. Thermal cameras measure infrared radiation from visible surfaces. They do not see through walls or equipment, which is why electrical knowledge and proper interpretation of the images are important.
How often should electrical infrared inspections be completed?
The appropriate frequency depends on the facility, equipment, operating conditions and maintenance requirements. Some commercial and industrial properties incorporate IR imaging into a recurring preventative maintenance program.